.NET, Audit Wizard
How to reupload data from my Loggers into a new audit
Create a new audit in Audit Wizard which is identical to the original audit Navigate to Audit Wizard and create a new audit. Note that the new audit must have a unique name from the original audit. Fill in the 'Audit Location' menu and move on to ...
'Calculate my kW' was enabled on one or more loggers during SYNC process. What does this mean?
During the audit synchronisation process, SCADAR uses the logged data to establish various items of additional data such as 'kW'. kW is calculated by taking the logged 'Volts', 'Current' & derived 'Power factor' to calculate the resulting 'kW'. If ...
Additional information that will help to setup the "Compressor Table"
The differences in Regulation/Transmission types: Explanation of the Regulation/Transmission type: Five step (0 – 25 – 50 – 75 – 100%) => used for 5 step Piston compressors (not for screw compressors) Load/Unload/Modulation (0 – 100%) => For a fix ...
In Audit Wizard Step 3 'Create site & energy profile' what is 'System Shutdown hours per annum'?
This feature is intended to improve the accuracy of annualized calculations across the SCADAR platform. Specifically... When you install loggers you gather knowledge in the form of data That knowledge includes when equipment is operational when ...
Can I edit or change the Audit Wizard configuration after I've transferred the Audit 'CONFIG' to the SCADAR Base Station?
When a user 'CREATES A NEW AUDIT' that Audit is first given a 'Unique name' which cannot be changed or over-written after its been used! However, SCADAR.NET does permit changes to the Audit Wizard configuration. The changes SCADAR.NET permits ...
How do I assure accurate compressor status and calculated flow results on SCADAR.NET?
To understand this topic, its beneficial to first understand that SCADAR.NET does not actually know 'compressor status'. If you think about it, when the physical audit was performed, there's nothing actually logging compressor status! Instead, ...
Can I edit Global compressor tables?
Global compressor tables are published by site administrators only. Regular users can edit global compressor tables but when they do they must be saved as a 'PRIVATE' compressor table... Lets assume we're in Audit Wizard and we want to change the ...
Can I delete an audit from SCADAR.NET
Yes you can! Navigate to Audit Wizard, select the audit concerned. From the Audit Wizard - transfer data window use the delete audit button to remove the audit you want to delete. There's an acknowledge request prompt prior to the audit being ...
How does SCADAR determine what pressure logger is 'System pressure'
When you create a new audit using Audit Wizard you configured the Base station and loggers that would be used during the audit. On the logger configuration popup there's a check box option to indicate that the logger being configured is used to log ...
How do I know what loggers should be installed at the audit location?
When the audit was configured on SCADAR.NET using Audit Wizard, information about the Audit location was established. This included relevant information about the quantity of data loggers, their serial numbers etc. At the end of the Audit Wizard ...
How to start a new audit on WWW.SCADAR.NET
On www.scadar.net: Step 1: Create a new audit After you log in, go to 'Audit Wizard'. Enter new audit name and click the 'Create' button Step 2: Audit Location Enter information about audit location and audit location contact. Filling out the red ...