.NET, Audit Wizard
Configuring a CS (Current & Voltage) Data Logger
Select logger: Fill in the Logger's serial number. Describe it's intended use. This will be a description of what the Logger's purpose was during the audit. For example, if there are multiple kW Loggers you may have one called 'Comp 1 kW' and ...
Configuring Base Station and Data Loggers
Configuring the Base Station: Enter the Base Station serial number and press 'OK' Configuring a Pressure Logger (PS.16.Bar and PS.60.Bar): Enter the Logger's serial number Enter Logger's intended use (optional) If the Logger will be used for ...
Select & configure a new logger for the first time.
When selecting & configuring a new logger for the first time: Enter the serial number of the device concerned. Note: it's not necessary to enter all of the 000 on the device decal. If the decal reads BS SN 000602 for example, you only need to enter ...
All about sync quota
When you navigate to the Audit Wizard 'HOME' tab you'll see a feature called 'Monthly sync quota' displayed... Sync quota is a feature we've introduced to regulate our 'fair use' policy. Our fair use policy anticipates each user account may SYNC up ...
What is System Shutdown hours per annum
System shutdown hours per annum can be found in Audit Wizard, step 3 'create site & energy profile'. It's purpose is to omit or exclude hours from annual hours calculations. An example of this would be a period of non operation or shutdown during ...
Creating a site and energy profile
The 'Create site & energy profile' menu is shown below. Resources for understanding this menu and it's four primary sections will be included in this article. 1) System shutdown hours per annum 2) System CO2 Factor 3) System storage volume The ...
SCADAR.NET, AUDIT WIZARD, FEATURES EXPLAINED
Use this information bulletin for an in-depth explanation how Audit Wizard works. This information bulletin was produced following the release of SCADAR.NET V13.1.0.0 Page style, layout and graphics can change over time!