Select & configure a new logger for the first time.

Select & configure a new logger for the first time.

When selecting & configuring a new logger for the first time:
  1. Enter the serial number of the device concerned. Note: it's not necessary to enter all of the 000 on the device decal. If the decal reads BS SN 000602 for example, you only need to enter 602.
  2. The new logger does not yet exist in the SCADAR database. By pressing 'OK' at the bottom of the interface, the new serial number gets enlisted.
  3. Perform an update on the (physical) logger to add up the latest software version to the new ID.
    1. To learn how to update a physical logger, consult this article.

Your logger has not been updated yet when the following message is displayed. 


    • Related Articles

    • Install and configure a SCADAR Base station for first use

      Watch this MP4 file for a quick guide on installing and configuring a SCADAR Base station for first use. CLICK TO CUE VIDEO IN A NEW TAB

    • How to reupload data from my Loggers into a new audit

      Create a new audit in Audit Wizard which is identical to the original audit  Navigate to Audit Wizard and create a new audit. Note that the new audit must have a unique name from the original audit. Fill in the 'Audit Location' menu and move on to ...

    • Logger, flow

      SCADAR flow logger data sheet

    • Configuring a CS (Current & Voltage) Data Logger

      Select logger: Fill in the Logger's serial number. Describe it's intended use.  This will be a description of what the Logger's purpose was during the audit. For example, if there are multiple kW Loggers you may have one called 'Comp 1 kW' and ...

    • How to start a new audit on the SCADAR Base Station?

      Before starting a new audit, make sure your Base Station settings are up to date and create a new audit configuration on the SCADAR Cloud.  For more info on the above, please review the FAQs 'How do I prepare the SCADAR Base Station for first use?', ...